MIG - MAG SYNERGIC DOUBLE PULSE WELDER
MIG 280 DOUBLE PULSED

• 400V three-phase inverter industrial equipment for MIG, MMA and TIG welding with intelligent synergic adjustment, with 60% factor and high power.
• Synergic system suitable for welding all types of carbon and stainless steel, aluminum magnesium / silicon, aluminum and copper.
• Includes specific configuration modes for MMA coated electrode, pulsed / double pulsed and manual mode. Spray mode without splashes in all types of positions thanks to the pulses.
• Includes 2T, 4T, 4TH and Spot sequence modes – Includes parametrics optimized for 0.8, 1.0 and 1.2mm thread.
• Includes external regulation of Hot Start and Arc Force for professional MMA welding.
• Includes two sets of 25mm² torches. A special short one for aluminum and another long one for steel.
• 4-contact drive mechanism including quadruple ‘U’ pulley special for aluminum and special ‘V’ pulley for steel.
• Advanced modular electronics managed by two microprocessors for long life and easy technical service.
• Easy transport and storage: Very compact and low-mass machine. Includes tray for gas cylinders.
• Manufactured under strict European specifications 2011/65/EU, 2014/35/EU, 2014/30/EU, IEC 60974.
• Adaptive thermal protection and software managed overload protection system.
• Low consumption: maximum of 15 amps per phase.
• Suitable for generators, capable of withstanding voltage deviations between ±17%.

• Power cable – 2.6m x 1.5 mm²
• Earth clamp cable – 2m x 25mm²
• Electrode holder cable – 3m x 25 mm²
• Torch for INNOTEC 24 aluminium – 2m x 25 mm²
• Torch for INNOEC 24 steel – 4m x 25 mm²
• Cylinder support tray – 29 x 27,5 cm
• Cylinder safety chain – 90 cm
• Transport wheels – 7 / 20 cm
• 1 / 1.2mm “U” rollers – 4 Uds
• 0.8 / 1.0mm “V” rollers – 2 Uds
• 1.2 / 1.6mm “V” rollers -2 Uds
• Flat rollers – 2 Uds
• 0.8mm contact tip for steel -2 Uds
• 1.0mm contact tip for steel – 2 Uds
• 1.2mm contact tip for steel – 2 Uds
• 1.6mm contact tip for steel – 2 Uds
• 1.0mm contact tip for aluminium – 2 Uds
• 1.2mm contact tip for aluminium – 2 Uds

All accessories available in our catalogue